11 Steps to Spray Paint Your Car Like the Professionals - Auto Bodywork Paint Repair

11 Measures to Spray Paint Your Car Like the Professionals - Car Bodywork Paint Repair

You will be surprised to find only the way to spray on car paint actually can be simple. That does not mean that you go at it and can just grab a tin of paint. There are some basics you need to understand. Both in application and the preparation.

Step A:

Prepare by assembling all of your items that you are going to need. Any parts that don't need to be sprayed and that can be removed subsequently do so.

Step B:

You will need to analyze the car for any rough spots. These will have to be sanded with 300 grit sand paper. This will smooth out the rough spots. It also allows the aerosol car paint to adhere better. Once you've finished sanding, make sure all of the dust dirt and debris are removed from the vehicle. It's imperative the auto be absolutely clean.



Step C:

This will make sure that you get an overall even coating of your coloured paint plus helps the paint to Alloy Wheel Repair Essex adhere well. Ensure you apply light layers and allow for drying in between, when you spray the primer. How to spray car paint requires a little getting used to.

Step D:

Now you are well to the point at which you might be about ready to spray the colour. Before you start with the car in either case, make a few practice strokes on an item. Once you're ready, start the passes with the paint without reluctance. You may end up with uneven coverage, if you hold the spray can or gun in one area and potentially the paint will run. If this happens you've got a significant repair job on your had. You'll most probably have instructions regarding how you can spray on auto paint using the equipment or spray cans.

Step E:

It's up to you whether you want to wet sand between coats of colour and primer paints. Check with someone that's familiar with the way to spray on car paint, or you might want to study this choice on the internet

Step F:

You're down to the finishing touches once you might be absolutely satisfied with the shade. You may now want to apply several coatings that are clear. This can give the shine and finished appearance to the car as well as protect the finish. It will be up to you personally although likely two coatings will be satisfactory. Make absolutely sure it truly is dry in between coats.

Step G:

Yet again, you have the option of wet sanding if you prefer. Again, it is suggested you request the guidance of individuals which are comfortable with how to paint a car. You need to wet sand with the following grits in this sequence if you decide to follow this measure then. Use 800, 1000, 1200, 1500 and the ultimately the 2000. This will remove spots that could not be overly light in the clear coat application.

Step H:

Now you will desire to using a rubbing compound in order to use a 2000 grit to remove any scratches to buff the surface.

Step I:

You should now buff the surface. To try this just use a medium cut polish.

Step J:

As a final touch, you may want to apply a number of coats of wax.